Quote:
Originally Posted by Manoel
I've had the exact same problem you described, except I was using a competition dongle (practice time at home). The problem only happened three times, two with the flashing code error light. The other time, code error turned on steady and only a cold boot would fix it (resetting didn't do a thing)....
|
This sounds real close to what I keep seeing. It usually happens in response to a change in command input, but I can't figure out exactly what triggers it.
The fix I've discovered is to re-upload the master and user code (although sometimes just re-uploading the user code works). Not sure if this is relevant to the new 3.0 compatible code, maybe we should move to a different thread?
- Greg