|
Re: How to Auto Calibrate
Um...
What are you calibrating?
If you mean joysticks...
Plug your OI into a laptop via serial connection (Use the Dashboard port on the OI).
Then, open IFI Dasboard. Make sure your jumper is set to OI DATA (if it's on RC DATA, move it to OI DATA)
Play with the trims until p1_x, p1_y, p2_x, p2_y... etc are all set (to 127)
__________________
Jimmy Cao
Team 469 2006-2010 Student/Alumni
Team 830 2011-2012 Mentor
Last edited by Jimmy Cao : 08-03-2008 at 11:11.
|