Quote:
Originally Posted by Matt H.
Wow I can't believe we didn't check that... I'll add that as one of the first things we need to check once the robot comes out of the crate in LA. If the yellow jumper block is the problem how would be best fix that and ensure that it does not become a problem again?
|
On our robot, the problem was simply not tightening down all the screws on the jumper block, tightening them down solved it. If the jumper block looks "fried" in any manner (I would pull it out and test it for resistance if the screws are tight) then I would replace it (I believe there are replacements available at Pit Admin if you or other teams don't have one).