|
If you are mounting a non-driven lawnmower wheel, the scintered brass bushings that were in your kit have an outer diameter of 1/2" and should fit nicely inside the lawnmower wheel; however, if you are using it as a drive wheel, you might want to try bolting the split-tapered bushing to the wheel (there are 2 unused holes) and attaching the sprocket to the bushing in the normal fashion; this is discussed in both the How-to video and the How-to manual. You can even drill holes through the sprocket and attach it directly to the wheel if you want to (it's your sprocket: enjoy!)
|