Quote:
Originally Posted by A_Reed
how is the lower plate supported? I know it used as a bearing surface, but it is sandwiched between plates or riding on small ball casters. I have always wondered how this work with swerve modules, I understand the rest of it but the lower support plate is the only gap in my limited knowledge of drive systems(I don't go into the kinematics...yet).
|
The lower plate isn't necessarily a support plate, just a bearing surface like you said. Due to the nature of friction, it does a little support, but mainly it just rubs against flat plastic patches (lubed up to reduce friction) on the frame to aid in steering the modules. The face of the contact between the plastic and the plate is purely vertical. No horizontal contact is made between the plate and the frame. It is welded, in the corners, to the square tube that makes up the vertical body of the module.