Quote:
Originally Posted by andrew_4_life
When I load this code, the drive seems to mess up. Going forward and back is fine, but it won't turn to the correct side. When I turn "RIGHT" it turns "LEFT", when I turn "LEFT" it turns "RIGHT"
I've also tried switching the PWN cables but that just really messed up the controls because it was going backwards.
|
It sounds like you just need to redefine which direction is "forward" on your robot.
Seriously,
Bongle has a suggestion that will work. You could also fix it in hardware by swapping the motor connections on the output of the speed controllers. That will make the motors run in the proper direction.