Now that team 2092's regional compettition is over we are to program the two robots we have to be able to go through a section of the school without touching the walls and it has to run automynously. We will be using easyc for this and would like help on how to do this.
The team is divided into two teams and unlucky for my team we dont have the programer. The other side does. Since I am highly inexperience with programming I would appreciate any and all help given to me.
I need to know how to write the program and if at all possible I would like a template for the program that I could just tweak to match our robot.
The robot uses two wheel drive. The rear wheels are traction while the front wheels are omnidirectional.
Though we are using the robot from the competition we are taking off the forklift so the only thing we are driving around is the base.
If you need anymore info to help me I'll be more than happy to give it. If you would prefer to email me or IM me about this to explain things...
My Yahoo ID is
lightofdragon17@yahoo.com
My gmail ID is
1337.etoile@gmail.com
My hotmail ID is
etoile.1337@hotmail.com
My AIM ID is
saikozettaibogyo@aol.com