|
Re: Serial data out of the programming port
Doug,
I'm not sure if a wait commend via flow control will effect the RC and cause it to stall. I feel that it is very unlikely, and that RC just ignores any type of flow control. But, to be sure if I was in you situation I would build a serial cable with only ground and RX pins connected on the logger end. This would assure that you logger isn't effecting the RC it wouldn't be able to send any data back to the RC.
__________________
FIRST Team 501 PowerKnights - Mentor
FIRST Team 40 Checkmate - Mentor Alum
FIRST Team 146 Blue Lightning - Alumni
|