|
Re: help with Operator Interface and FRC robot Controller
now I have try to connect the RS485 converters to the RADIO porst,but dont work, after I have remove RS485 converters from RADIO porst,and hook up the Female-Female cable into the Tether port again,come only 1 GREEN LED and 1 Yellow LED on FRC robot Controller.same on the Operator Interface ,but is have 2 Green Led and 1 Red Led
FRC robot Controller
Battery Power : GREEN
Program State : YELLOW
Radio Modem : no LED
RC Hardware : no LED
RC Mode : OFF/ no LED
Operator Interface
POWER ON : GREED
DATA TX : GREED
NO DATA/Radio : RED LED
sow what happen?
Is the FRC robot Controller or Operator Interface broken
Last edited by RoarRoar : 16-04-2008 at 00:59.
|