[Billfred]

On 1618:
2005: The rails and end caps are assembled; that's about it.
2006: It hasn't been run since I joined the team (and, if the sources are to be believed, it didn't run well when it did run), but it's all physically together. We keep talking of overhauling it, but plans haven't ever quiiiiiite made it to fruition.
2007 (Uppercut): We changed the arm to pneumatics (Uppercut now can only deliver an uppercut to the particularly short), and the gripper still doesn't work, but it's driving and together. We removed some superfluous electrical components along with the arm conversion.
2008 (Speedy Debris): Exactly how we left it at Chesapeake. I'm hoping we can get something together in the off-season for it.

On my old team, 1293:
2004 (Bob): Just the frame remains.
2005 (Ockham's Raizor): Only the frame and side panels remain; much of the 80/20 of its lift was used on Atlas.
2006 (Chomp): Stripped to the drive base. The practice robot's mechanism is still around, though.
2007 (Atlas): Still around and running (though not necessarily turning).
2008 (R5D5): Still in one piece, last I heard.