Thread: Help Programming a Quadrature Encoder
View Single Post
  #10   Spotlight this post!  
Unread 18-06-2008, 15:48
pogenwurst pogenwurst is offline
Ubuntu User
AKA: Brian
FRC #2007 (Robots of the Round Table)
Team Role: Leadership
  
Join Date: Jan 2008
Rookie Year: 2007
Location: Duluth, GA
Posts: 78
pogenwurst is on a distinguished road
Send a message via AIM to pogenwurst
Re: Help Programming a Quadrature Encoder
Quote:
Originally Posted by IKE View Post
http://www.killerbees33.com/index.ph...d=27&Itemid=50

This is a link to some of Jim Z's programming tips. If your robot is slicing one way or the other, wheel encoders may help, but you can also use a gyro and have it adjust to keep a 0 heading. Sorry I am not a programmer, but hopefully some of Jim's stuff might help.
I just took a glance there, and the following page has some nice illustrations of encoders: http://www.killerbees33.com/index.ph...86&Itemi d=50