[Al Skierkiewicz]

Please note that the Rockwell block has a specification for strip length that teams chose to ignore. Without stripping to 5/8", the wire was guaranteed to push out as the screws were tightened. The new Waco blocks have a similar specification. You must strip 1/2" of insulation for the wire to be properly terminated in the 745-85X block according to the manufacturer. You must strip 1/3" of insulation for the wire to be properly terminated in the 745-38X block according to the manufacturer. Their ability to stand up to robot movement will be tested during the beta testing. Please standby...

We might as well get this discussion going early, so let everyone know what the spec is.