[Bryan Herbst]

Okay, we finally got around to putting stuff together, and we are looking for tips on how to improve the cannon.

It actually has pretty decent range (shoots t-shirts about 30-40 feet), but it takes about a minute to fully pump up the tank. Now, this is pumping it to 80 PSI, but right now we are working at someone's house, not the school, so we should be able to lower the PSI and still be able to get shirts into the stands.

Currently, the barrel and tank are both made of 3 inch diameter PVC (please keep reading) and are both about 30 inches long. We are pumping the tank with two of the KOP air compressors. It takes about 1 minute and 40 seconds to pump the tank full with one compressor.

Now, as for the PVC tank- Yes, we are aware it is dangerous. However, we are limited on funds (currently have NO sponsors), and don't have many other options right now. We will be getting a different tank ASAP, but this is what we have right now. We have taken plenty of safety precautions (we stand around the corner from the tank, so if the tank explodes, it will explode into a wall and the person's lawn).


Now, if someone could suggest how to get a better pump, a better tank, or another way to do this more efficiently/effectively, we would be much obliged.

EDIT- Just remembered, and thought I would mention- We are currently using a 24v sprinkler valve hooked up to a standard FIRST control system (i.e. a 12v circuit). Would this make the solenoid open slower, and thus give us less bang per shot, or would it really not affect it at all?