|
Re: pic: Something is blocking the 548 display case!
Team 2028 uses ours ALL the time. Last year we used it to make the drums our forklift would wind the cable up on. The only thing to remember is to be careful, anything with less than about a 1/4 in thickness is most likely to break as we found out the hard way. Also although it may seem stupid, when printing a larger object, start it the night before, and remember to make sure you have ABS! It also comes in handy to build custom motor mounts for the Denso window motor.
__________________
"Measure once, cut twice... wait... what?"
"Two things needed to build a robot.. WD40 for the things that don't move but should, and Duct tape for the things that move but shouldn't"
|