[Mike Martus]

1. How are the Jugs going to be placed around the goal relative to the bars?

Answer: Refer to the drawings. Please note that the orientation of the three goals may not be the same while still in the same location.

2. The kit list says that we should have four black plastic wheel spacers(#54), but the list says we should have two black plastic wheels(#47). How many of each should we have?

Answer:
There is an error on the inventory sheet. You have 4 spacers and 4 wheels.

3. Are there four or six bolts in the jug?

Answer:
Each juice container will contain 4 1/4-20 hex head bolts 1.5 inches in length.

4. What is a legal swivel joint? The rules state fasteners can not have other purposes.

Answer:
You were provided with 4 Universal Joints (part # 23) in your kit. Other than that all parts must be either kit provided materials or on the additional materials list.

Answer:
Fasteners are just that fasteners. Please read the definition of a fastener on the additional materials list that was on the kit inventory sheet. It is spelled out very clear there.