|
Problem Solved...
I eventually solved my problem.
It turned out that it didn't matter where the controllers were plugged in, just what elese happened to be connected.
I have a Microchip PicKIT-2 programmer that is usb based.
If I have this plugged in, the Control Station software won't run.
I guess these is some incompatibility somewhere.
If you have a simmilar problem, remove stray USB devices.
__________________
Phil Malone
Garrett Engineering And Robotics Society (GEARS) founder.
http://www.GEARSinc.org
FRC1629 Mentor, FTC2818 Coach, FTC4240 Mentor, FLL NeXTGEN Mentor
|