Thread: Stretcher/goal issues-- PLEASE HELP ME!
View Single Post
  #5   Spotlight this post!  
Unread 23-06-2002, 23:22
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
  
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Re: is this correct?
Posted by ChrisH at 1/22/2001 3:41 PM EST


Engineer on team #330, Beach 'Bots, from Hope Chapel Academy and NASA JPL, J & F Machine, Raytheon, et al.


In Reply to: Re: is this correct?
Posted by Frank Toussaint on 1/22/2001 9:27 AM EST:



: In the first goal we made, with the 34+ inch base, the aluminum pipe touched the vertical pipe. When we rebuilt it with the 36+ inch base the aluminum pipes were well away from the vertical pipes. The drawings that came with the kit are wrong (per FIRST); use the drawings dated 1/8/2001 on FIRST's documentation page on their web site: http://www.usfirst.org/2001comp/Docs/

Before you build make sure you have CURRENT documentation. This is a problem even in the real world, get used to it. We tossed all of our Rev 1 drawings to make sure we didn't get confused. It is also important to remember that documentation changes can happen through Team Updates as well as drawing changes.


__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.