|
pull sprocket off
Posted by Ken Leung at 1/22/2001 3:45 PM EST
Student on team #192, Gunn Robotics Team, from Henry M. Gunn Senior High School.
In Reply to: Re: Joe's post
Posted by Justin Stiltner on 1/22/2001 1:24 PM EST:
I believe it is legal to modify the output shafts of motors in anyway you want, as long as you don't do anything to the inner part of the motor (like the magnets). Last year we put a key/keyway on the output shaft of the Van door motor and mounted a slightly larger sprocket on it, and it was all right to do that. Just be really careful when pulling the sprocket off the shaft, because you risk bending the shaft in the process.
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|