Quote:
Originally Posted by Gaurav27
Eric mentioned omni wheels. Just thinking aloud here...
Should omni wheels be on the end where CG is greater or less than the other end? The end that has a greater CG would remain on the ground for most of time where as the end with less CG. So the end with omni wheels will help in turning and thus should be on the end with a larger CG.
|
When using omniwheels, you'd typically eliminate the "rock" from your 6WD -- and so both ends are on the ground at all times.
Assuming that you have four traction wheels and two omniwheels, you'll want for your center of gravity to live above the traction wheels, not the omniwheels. Increasing the total percentage of the robot's weight acting through the traction wheels increases your tractive force compared to placing it over typical omniwheels because the omniwheels have a lower coefficient of friction.