|
Re: updating firmware on crio
When you start the Imaging Tool, does it say "No CompactRIO devices were found. Verify the network connection." or does it let you select the cRIO from the list and then it complains after you hit Apply?
Either way, double check that you have made your IP static to the right thing.
If you are going straight from the laptop to the cRIO, you'll need to use the crossover cable (the orange one), if you are connecting to it through either the DS or the router, then normal cables will work.
If it still doesn't work, try disabling your other network interfaces. I had a loopback device I forgot about that was within the range of the cRIO. Two interfaces in the IP range = bad.
__________________
print$q=chr(ord($q)+$1)while("7443-0201-8465130105-12-03135-82482113-06-7672-070208-0613-70"=~/(-?\d\d)/g);
|