Thread: driver station doesn't see robot
View Single Post
  #4   Spotlight this post!  
Unread 29-11-2008, 21:54
BrianT103's Avatar
BrianT103 BrianT103 is offline
Registered User
AKA: Brian Taylor a.ka. BT
FRC #0103 (Cybersonics)
Team Role: Mentor
  
Join Date: Apr 2006
Rookie Year: 2006
Location: Kintnersville, PA
Posts: 57
BrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud ofBrianT103 has much to be proud of
Send a message via AIM to BrianT103
Re: driver station doesn't see robot
You could have a number of issues...

1. Did you configure your wireless router and wireless gaming adapter to communicate with one another by inserting the CD that came with the router into a computer?

2. Is the Ethernet cable that is running from the router to the DS plugged in the proper locations?

Just because the DS reads the battery voltage as 0.0v, it does not mean that the two are not communicating with one another. In order for the battery voltage indicator to display properly on the DS, port #7 on the analog breakout must be configured properly.

Please try to limit technical issues/discussions to the FIRST Control System Forum.
__________________