Thread: LV 2009 Dashboard
View Single Post
  #1   Spotlight this post!  
Unread 11-12-2008, 11:17
Terry Sherman's Avatar
Terry Sherman Terry Sherman is offline
Mentor -- Software
FRC #0093 (NEW Apple Corps.)
Team Role: Mentor
  
Join Date: Oct 2004
Rookie Year: 2003
Location: Wisconsin
Posts: 25
Terry Sherman is an unknown quantity at this point
LV 2009 Dashboard
We've got our early 2009 control system. We've done the bench-top test, upgraded the Driver Station, LabVIEW and the cRIO. We've deployed the Basic project (set to run at start-up). That seems to work, we get the battery voltage readout on the DS. Before connecting our motors up, we wanted to verify the outputs via the dashboard. We connected our PC to the Driver station and the driver station to Ethernet port 1 on the cRio . We can connect with the cRio (deploy, etc). When we run the dashboard though, we do not get any updates. What are we missing? Is there a dashboard enable or something we are missing?

Thanks,
-Terry
__________________
-Terry Sherman
Team 93 Software Mentor since 2003