Quote:
Originally Posted by Tank2010
We are having problems with the bench top tank drive test. When the controller in USB port 1 is moved both motors spin and the jaguars indicate in opposite directions. The controller in USB port 2 does nothing. We have tried flipping the controllers and USB ports. We switched sidecars and modules. To no avail. Can we get some help?
|
The documentation says to install a jumper from signal to +5 for arcade mode and no jumper for tank mode. The inputs on the DS are floating, so you need to install a jumper between signal and ground on DS DI 1 to select tank mode. We used a PWM cable and tied black to white and installed the three pin cable on the DS.