Thread: [FTC]: Field Management System
View Single Post
  #3   Spotlight this post!  
Unread 18-12-2008, 18:19
Michael Coleman's Avatar
Michael Coleman Michael Coleman is offline
Registered User
no team
  
Join Date: Nov 2006
Rookie Year: 2001
Location: Orlando, Florida
Posts: 82
Michael Coleman is a glorious beacon of lightMichael Coleman is a glorious beacon of lightMichael Coleman is a glorious beacon of lightMichael Coleman is a glorious beacon of lightMichael Coleman is a glorious beacon of light
Re: [FTC]: Field Management System
The FTC Controller Station is a good surrogate for the Field Management system. Cycle through the following four states to simulate a match.

Before Match:
Mode: Autonomous, Status: Disabled

Autonomous:
Mode: Autonomous, Status: Enabled

Between Autonomous & TeleOperated:
Mode: Autonomous, Status: Disabled

TeleOperated:
Mode: TeleOperated, Status: Enabled

This test procedure will work with an All-in-one program or separate Autonomous and TeleOperated programs. For NXT-G and LabVIEW users, don't forget to select the name of the TeleOperation program with the Program Chooser on the NXT. ROBOTC users specify the name of the TeleOperation program in the Joystick Control debug window.

ROBOTC users can run the same test inside the ROBOTC debug environment by using the "Mode" section of the Joystick Control debug window.

Michael
Reply With Quote