Thread: Indicators
View Single Post
  #1   Spotlight this post!  
Unread 24-06-2002, 00:03
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
 
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Indicators

Posted by Eric at 2/2/2001 3:07 PM EST


Other on team #30, Fury, from HTHS.



Hi,

I'm working on control systems for our robot and ran into a problem. We'd like to give the driver feedback from the robot and the OI using LED's, etc. on our black control box. However, I can see no way of either a) adding LED's for anything but the same ones that are already on the OI or b)having anything close to the total number of indicators that we need (about 8-12). My ideal solution for the problem was to use a multiplexor inside the black box and feed it with serial output from the OI, which would then turn on various indicators. However, they are not on the approved equipment list. Also, what is the deal on LED's? The aforementioned list makes no mention of them. Any assistance would be greatly appreciated.

Thanks,
Eric Gallimore



__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.