[Kitmor]

Yes that is how you set it, although I would leave the DNS on automatic. Make sure you are setting the IP on the correct network adapter, ie make sure you set it IP for the wired network card on the computer, if the computer has WIFI.

I got the 255.0.0.0 from the manual, and it worked for our team. I can't say that 255.255.255.0 wouldn't work as I have not tried it, but we went by the configuration manual and it worked.

Another thing that I've seen mentioned on the FIRST forums if you are using a computer with more than one network connection, is to disable the all of the network cards except the wired one that is connected to the cRIO. Because during the upgrade process the IP is sometimes set to 0.0.0.0 and this can mess things up if you are connected to other networks at the same time.