[Hadi379]

Ravena,

When we imaged the cRIO, we didn't use the crossover cable and we left it plugged into the the webcam. We then took an ethernet cable from port 1 on the cRIO to one of the ports on the driver station. Then, and ethernet cable from the other port on the driver station into the laptop. Power on both devices, driver station and cRIO.

Your laptops static IP should be set to 10.0.0.6, and NOT the IP with your team #. I'm not sure how your teams number would already be in the cRIO if this is first time you have imaged the cRIO. When you open the cRIO imaging tool, the "current IP" will be in the far left column of the device table. The subnet mask should be set to 255.0.0.0