|
Re: DS not owrking
Quote:
Originally Posted by dpeterson3
We tried setting all IP's a second time. They are correct. I just find it odd that the DS was looking for the IP of a laptop instead of the IP of the CRIO. Has there been an update for the DS reciently that we didn't get? One of the first things we did when we go this was update the DS (before we even tried to test it. It has not worked yet).
|
Now we are getting somewhere.
The DS should not be updated until instructed to do so in the manual. If it is done out of order, it won't communicate. So, now the question is, what else needs to be updated? I'm guessing you might as well update the LV software with update number 2, and re-image the cRio with the newest image. Then, set the addresses and all should be well.
Bottom line, it sounds like the directions in the manual were not followed, correct?
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|