[Team 1708 Dave]

Ahhh... We're not alone with this problem. 1st we couldn't change the team number. We got help from here suggesting to up-grade the firmware. So we tried this option. Here's what happens. Install the flash drive before start up. Connect power and allow to boot up. Held both buttons until told to release. Held "UP" unit told to release the same to the "Down". Held the select and the screen flashes quickly and says this will take up to 3 min. The flash drive indicator flashes 3 times then the screen returns to the normal operating screen. With the "OTB" still on the bottom of the screen.

We can really use some advice as well.

I read on here there are only a few flash drives that a proven to work but can't seem to find the post anymore. We also formated our flash drive and checked to see if we had the ".bin.bin" issue. We don't.