View Single Post
  #16   Spotlight this post!  
Unread 05-01-2009, 16:31
web_master_dpep's Avatar
web_master_dpep web_master_dpep is offline
"What you do, is who you are"
AKA: Dustin Pepper
FRC #0066 (Flyers)
Team Role: Webmaster
 
Join Date: Nov 2007
Rookie Year: 2008
Location: Ypsilanti, Michigan
Posts: 46
web_master_dpep is an unknown quantity at this point
Send a message via AIM to web_master_dpep Send a message via Yahoo to web_master_dpep
Re: Blocking your own trailer

Quote:
Originally Posted by JHSmentor View Post
in response to the robot width being the 38" direction - I believe this is totally legal but it does state in the rules that the trailer will be attached to the SHORT side of the robot. so, if the robot design had the wide sides in the front and back, then the trailer would be sliding along beside it on the left or right.
I didnt see this in the rules. You may have made a mistake while reading
<R18>BThe Trailer Hitch must be rigidly attached to a fixed location on the ROBOT, with the long dimension of the Trailer Hitch horizontal and the opening of the C-channel facing away from the ROBOT. The horizontal center line of the Trailer Hitch must be 2-13/16 inches above the floor.
__________________
ŴΣß ΜăşťΣΓ đÞΣÞÞ
Reply With Quote