|
Re: Axis cam problem
The camera should be set to 192.168.0.90 and configured magically with the Setup Axis Camera program.
It must attach to the second port on the cRIO with a cross over cable (the orange one in the kit is the cable).
Are you speaking about the Vision Assistant? I'm not entirely sure what you mean when you say that NI Vision cannot get the image.
Attached below is the camera code from the Basic Robot Main.vi. it handles opening it and everything. The GetImage VI outputs the image which you can process with NI Vision FRC VIs.
__________________
print$q=chr(ord($q)+$1)while("7443-0201-8465130105-12-03135-82482113-06-7672-070208-0613-70"=~/(-?\d\d)/g);
|