View Single Post
  #5   Spotlight this post!  
Unread 06-01-2009, 16:01
shaggy0928 shaggy0928 is offline
Registered User
FRC #1339
 
Join Date: Dec 2008
Location: East High, Denver
Posts: 9
shaggy0928 is an unknown quantity at this point
Re: Problems with the Axis Camera

I seem to be able to use the camera (get onto the homepage through the installation software and see the live view) when it is at the IP address 192.168.1.90 and is connected through the router but as soon as I connect it to the computer, this all goes away. And I am still not able to use the camera setup from labview. My computer is at 192.168.1.1, is this a problem? Any help will be appreciated

UPDATE: I think that I have gotten it to work, but this is on a different computer then I was using earlier, so I will have to try more tomorrow. I didn't use the program that came with the cameram, I went to the page on my browser that got me to the home page of the camera. I then went to the setup tab (top of the window) and went in there. In one of the left side tabs, Basic Settings or something like that there is a sub-category of TCP/IP and I went into that and changed the IP address to the right one. I also deleted the 3rd one down, like default router. This seemed to work, as I went to the new IP address in my browser. Then I went to the Set up Axis Camera, and SUCCESS!!

Last edited by shaggy0928 : 06-01-2009 at 19:56. Reason: update
Reply With Quote