Thread: CRIO Error 60
View Single Post
  #1   Spotlight this post!  
Unread 06-01-2009, 16:24
TDohse TDohse is offline
Registered User
AKA: Thomas
no team (NI)
 
Join Date: Apr 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 39
TDohse is an unknown quantity at this point
Re: CRIO Error 60

LabVIEW error 60 is "The specified network address is currently in use". Based on that I'd guess you have some network device configured with an incorrect IP.

Common things to check are that you don't have other network cards enabled on your PC, you are directly wired PC to cRIO port 1 (with crossover cable if your network card is not auto-sensing), and that your firewalls are either disabled or won't block any of the traffic (including udp traffic, traffic to a 0.0.0.0 IP).
Reply With Quote