|
Re: CRIO not working with Windriver
Quote:
Originally Posted by dpeterson3
All right. I am tired of this CRIO. It will not take code from Windriver. We just tried a sample project and it will not deploy. The DS says no code next to the battery. Tonight, we switched the CRIO from Windriver to Labview in the imaging tool, and we all of a sudden have battery power readings, motors running, and everything else. The problem is we want to code in C++.
Here is the error message we get sometimes. "can not connect to 10.11.78.2:21" We have tried this through the DS, with a crossover, and just over the network. Any ideas what might be wrong?
|
I am going to echo charrisTTI and say the problem sounds like you didn't tell it to switch environments. You have to use the FRC Imagining Tool to reflash the cRIO and tell it if you wan't to use LabView or C++.
__________________
John Downey
Lead Robot Inspector - Purdue IndianaFIRST District
Whitney Young Magnet High School/Robophins (FRC 4302) - Mentor (2013-current)
Midwest Regional Planning Committee - Member (2012-current)
Boilermaker Regional Planning Committee - Member (2011-2014)
Robot Inspector (2008-current)
Purdue FIRST Programs - Staff Advisor (2008-2011)
Lafayette-Jefferson High School/Precision Guessworks (FRC 1646) - Mentor (2006-2011)
|