Thread: Working with spikes and servos in labview
View Single Post
  #2   Spotlight this post!  
Unread 07-01-2009, 11:01
dlesley dlesley is offline
Registered User
FRC #1915
  
Join Date: Dec 2008
Location: Washington DC
Posts: 4
dlesley is an unknown quantity at this point
Re: Working with spikes and servos in labview
You need to use the relay VI set from the WPI library. You can find those in the Actuator section. Look at the Relay Example in the LV opening screen. That should show you what needs to be connected where, and you can copy and paste pieces of it into your Main vi. For competition use, I'd recommend a case structure around the SET Relay VI, activated by an unbundled Button 1 from a Joystick GET, as well as changing any controls you can to constants.