Thread: Connecting Axis Camera
View Single Post
  #3   Spotlight this post!  
Unread 07-01-2009, 22:39
whitetiger0990's Avatar
whitetiger0990 whitetiger0990 is offline
Registered User
no team
Team Role: Programmer
  
Join Date: Mar 2006
Rookie Year: 2006
Location: Earth
Posts: 157
whitetiger0990 is a glorious beacon of lightwhitetiger0990 is a glorious beacon of lightwhitetiger0990 is a glorious beacon of lightwhitetiger0990 is a glorious beacon of lightwhitetiger0990 is a glorious beacon of light
Re: Connecting Axis Camera
The camera, when plugged into the cRIO, is on a different network than your computer.

To simplify:
Your computer is on the 10.12.45.* network.
The camera is on the 192.168.0.* network.

The cRIO's two ports are not routed or switched (as far as I know). You cannot ping -through- the two ports. When you connect the Camera to the computer, try changing the IP of your computer to.. 192.168.0.12 (or some other number in that net range) and pinging the camera at 192.168.0.90.

Remember, camera uses a crossover cable with the cRIO. All other situations it is not needed.

I think I explained that right..
__________________
print$q=chr(ord($q)+$1)while("7443-0201-8465130105-12-03135-82482113-06-7672-070208-0613-70"=~/(-?\d\d)/g);