Quote:
Originally Posted by stinkypooman
you cant, if you start with a dimension of 20x20, you cannot go outside for the 20x20. i havent seen this rule personally but my advisor told me this when we were discussing design.
|
It is painfully obvious that you haven't seen that rule, because it doesn't exist. In the future you may want to adopt the habit of quoting the specific rule (you can cut from a PDF document and paste it here in Cheif Delphi)
The first relevant rule is <R11>
At the start of, and during, the MATCH the ROBOT shall fit within the dimensions listed below:
(28 x 38 x 60 inches)
Then we have <R16>
Once the MATCH has started, the ROBOT may assume a PLAYING CONFIGURATION that is different from the STARTING CONFIGURATION. The ROBOT must be designed such that the PLAYING CONFIGURATION of the ROBOT shall not exceed the dimensions specified in Rule <R11>.