[Daniel_H]

I thought it would be easy to get it working on labview, since the functions are very self-explanatory, but the indicators doesn't make sense. So I need the datasheet as well

I tried the example code and it didnt work.
I set the gain at 0.007, as the sensors manual says, I also tried 0.0125 as the sample code.
The "Get angle" function returns a constantly increasing value starting in zero even if I don't move the sensor.. and the "Angular rate" displays a constant value, -1.22something

If I apply a regular get analog function to the gyro, I get 4,6 (volts) and it doesn't change much no matter if I turn it.. the Sensor Manual says it should be around 2,5V, so either there's something wrong with my wiring or my sensor