Quote:
Originally Posted by Steve Ketron
We set all the IP adresses as instructed in the FIRST manual. We would like to be able to view all the IP adresses while they are connected to see where the conflict is. I am most concerned about the drive station and the cRIO.
|
That message indicates that your PC conflicts with another device. So first, you need to know what your PC's IP address is set to.
Do start->run->cmd. Type 'ipconfig' (minus quotes). Write that number down (it should be 10.15.28.6, or else your PC's IP address was wrong). Change your PC's IP address to something else that won't have a conflict. Then browse to the IP address your PC just had to see what device is occupying it.
To check all the devices, try the verification steps I edited into my first post. Keep in mind that the DS and cRio's IP addresses are hardcoded when you set your team number, so as long as you can ping them at the IP where they are supposed to be, you can be fairly sure that they are on the correct IPs.