It looks like the PRO-E files made available are in a new format that isn't supported by my SolidWorks Student Edition (2008-2009)
All is not lost!
Some parts from the kit are already in
SolidWorks format. Available at
http://www.3dcontentcentral.com/part...true&l evel=1
and yes, you need a 3dcontentcentral login but it's Free.
Some parts are in
STEP format that SolidWorks can open:
i.e. You can get the C-Base Drive Chassis - Official Drive Base Frame for the 2009 FIRST Robotics Competition. from:
http://www.andymark.biz/am-0205.html
The chassis link is:
C-Base Long CAD File (.stp format, right click and Save As)
The Rover wheels are here:
http://www.andymark.biz/am-0284.html
You can get quite a few of the parts from the http://www.andymark.biz home page, and also if you browse through their site.
Here's how to open STEP files and save them in SolidWorks format (in case you wanted to know):
In SolidWorks, click
File > Open, then change the "
Files of type" to
STEP AP203/214 (*.step, *.stp)
Browse to where you saved the file and click
Open.
SolidWorks will open the file and convert it into it's own format which you can then save.
Hope that helps.
