|
Limiting PWM in pbasic
Posted by Alan Federman at 2/11/2001 9:59 AM EST
Engineer on team #255, Odyssey, from Foothill HS, San Jose and NASA.
Which is the best way to limit the maximum amount of power to a PWM driven motor? is it: pwm1 = (pwm1 - 127) * .25 + 127 or pwm1 = (pwm1 MAX 160 MIN 94)
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|