Thread: Problem deploying/running default code
View Single Post
  #1   Spotlight this post!  
Unread 10-01-2009, 11:59
blaxbb blaxbb is offline
Ohio State Engineering Scholar
AKA: Brian Barrett
FRC #2331
Team Role: Mentor
  
Join Date: Feb 2007
Rookie Year: 2007
Location: Vernon, New Jersey
Posts: 131
blaxbb is just really niceblaxbb is just really niceblaxbb is just really niceblaxbb is just really niceblaxbb is just really nice
Problem deploying/running default code
We are using labview and completed the benchtop tests. We configured the router, bridge, and CRio successfully. Now we are attempting to upload the default labview project to the CRio and do not get any motor control from the driver station. We can connect to the CRio in the project window so I do not believe it is network related, rather how we are running/uploading code. Could someone explain what we are possibly doing wrong and how to fix it.


***RESOLVED*** Anyone with this problem try reflashing the firmware on the driver station. It worked for us.
__________________
"Whether you think you can or think you can’t, you’re right." - Henry Ford
www.vthsrobotics.org
Last edited by blaxbb : 10-01-2009 at 13:52.
Reply With Quote