|
Re: Snap Action Breaker Values for the Motors?
There is nothing in the rules that concern these motors directly. The leads on the CIM motors are #12 and are short enough that I recommend (and Wildstang employs) mounting the speed controllers close to the motors and then use only the motor leads to connect to the controller. In this way a second set of connections is eliminated and thus a second point of failure. The Globe motors have a much smaller guage, #18 or #20 as I remember.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|