[Stillen]

You will not be able to "ping" the camera or see it in a browser once it is configured. Your IP address scheme is based on your Team number ....

example...

if you are TEAM 549, your address scheme is 10.5.49.x, x being the random individual interfaces.

your camera and certain cRIO ports are on the 192.168.1.x. You will not be able to see this network unless you port over or make a static route through the router. This is not what the device was intended for this year, so I do not recomend it.

If you can ping all the other devices on your network you are good to go.

If you want to "see" your camera, you need to use Labview and create a new project, you'll be able to see what the camera sees...