|
Re: Chain Tensioner
We made some UHMW & Ziptie chain tensioners which resembled those of Andymark. They were on 4 chains that were all at a 5-10 degree angle and they worked fine.
You can guarantee they'll work fine so long as the spacing between the chain through the tensioners is smaller than the diameter of your smallest sprocket. That may not be easy to do though.
__________________
Team 171 :: Cheese Curd Herd :: College Mentor, 2008-Present
Team 269 :: CooneyTech Robotics :: Student, 2005-2007
|