Quote:
Originally Posted by artdutra04
If I had to deal with hundreds of questions every day dealing with all kinds of questions (many of which are repetitive), I'd throw humor into the responses just to keep my sanity.
And I still don't understand everyone's dilemma about the bumpers. Cover all your corners on the robot perimeter with at least 6" of bumpers on either side of corner vertex. Must cover at least 66.67% of robot perimeter (string method) with bumpers. Leave opening for trailer hitch, so trailer makes bumper-to-bumper contact. Mount at correct height and fabricate according to instructions.
Unless I'm missing something, it's not that hard to figure out.
|
It gets into concave openings into your robot. Prior to the Q&A response where the GDC said that corners must be protected on both sides, many teams (such as mine, and from the look of it 842 as well) assumed that we wouldn't need bumpers on both sides of the corner. Moreover, the rule that bumpers can only be on the BUMPER PERIMETER means that there appears to be no way to satisfy the GDC while having exterior corners of less than 90 degrees on your robot. This makes a lot of designs I have seen on Delphi illegal, and I don't think that was the GDC's intent. For example, harvesters now effectively must drive the "wide" way in order to meet the apparent bumper rules.
Direct, specific questions have been asked by my team and by others in the Q&A forum, and they have yet to be answered. I can only assume that the answers are being withheld for Team Update 3.