|
Re: Re-Imaging FAILURE...Losing sanity!
I had to turn off the firewall in windows and use a cross-over cable to connect directly with my c-RIO. Also, when the computer finds the c-RIO, check the TCP-IP address. I started with 10.0.0.6 and tried to image the c-RIO through the DS as recommended by the manual. When it failed, I rebooted everything and tried again. When it came back up, the c-RIO held the IP address of my team, so I had to change the IP address on the computer and try again. I don't know if the cross-over cable was really necessary, but I was trying to eliminate all possible causes. By the way, the orange cable in our kit is a cross-over so you might want to try it connecting you computer straight to the c-RIO port 1. 
__________________
Formerly a mentor with Team Stealth, 1802. Thanks, kids. It was fun! 
2008 Greater Kansas City Regional Winner (Thanks 476 and 1806)
2010 Greater Kansas City Regional Gracious Professionalism Award
2012 Greater Kansas City Regional Imagery Award
"It doesn't hurt to be smart as long as you don't out-think yourself." -- Steve Fujita Former KC Chiefs player.
|