[PhilBot]

Hi

Yes..... Most "sample" programs come configured with a generic tean number (read IP address) or none at all.

Once you open the project, you will see the IP address as part of the realtime program node name (cRIO Controller 10.0.0.2).

Right Click on the Realtime node and select Properties.

From there you will see a place to change the program's name and IP address.

Set it based on your team # 10.xx.yy.2

Now you sould be able to connect using the run button.
Make sure you RUN the main vi (eg: Two Color Servo Camera Example.vi)

Have Fun.