Thread: CRIO Error 60
View Single Post
  #8   Spotlight this post!  
Unread 14-01-2009, 22:18
professorX professorX is offline
Registered User
AKA: Xavier
FRC #1660 (The Harlem Knights)
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 2005
Location: New York
Posts: 62
professorX is an unknown quantity at this point
Re: CRIO Error 60

Quote:
Originally Posted by landon2345 View Post
My team still cannot get the cRIO to update. Still getting error message: "The specified IP address is unreachable. Ensure that the IP address is on the correct subnet." We do not know what the problem is and we will try to get IT help today. We have been using a computer running vista basic 32 bit(dont know if that matters). I have Norton Antivirus so I have been shutting off the firewall and intrusion prevention. On the internet settings in TCP/IPv4 I have set the IP address to 10.23.45.6 and the subnet mask to 255.0.0.0. After trying the imaging we still always come up with the 'error' as seen above.

Any help would be much appreciated

-A pleading cry from all of us here at 2345.
It sounds like you are you not connecting the cRIO properly. Connect the cRIO from port 1 to the the laptop directly using the orange cross cable.

If that still does not work call NI and they will help you. That is what I did and I found out that it was a manufacture problem.

The number is
1-866-511-6285
1-7pm Central and just tell them your team number!
Reply With Quote