View Single Post
  #4   Spotlight this post!  
Unread 14-01-2009, 23:28
ExarKun666's Avatar
ExarKun666 ExarKun666 is offline
Ben Error/MC Ben/NC Ben
AKA: Ben Kellogg
FRC #2429 (LCEC)
Team Role: Programmer
 
Join Date: Dec 2007
Rookie Year: 2008
Location: La Caņada, CA
Posts: 208
ExarKun666 is an unknown quantity at this point
Send a message via AIM to ExarKun666 Send a message via MSN to ExarKun666 Send a message via Yahoo to ExarKun666
Re: Driver Station Update

Quote:
Originally Posted by Mark McLeod View Post
So I'm guessing you can't set your team number on the DS?
What is displayed on the DS screen on the bottom line?

As far as the dongle goes - does the DS screen say "Enabled?"
And you can't get it to say "Disabled?" Even when you completely disconnect the dongle from the Ds altogether?
I don't have the DS with me at the moment so as soon as I get my hands on it I can type up what it is giving me, but I know for sure about the dongle, when you disconnect it and you flip it up (enabled) and plug it in it will say enabled, but the motors don't run, and when you flip the switch down(disabled), without unplugging it in, the DS still says enabled. When you unhook it, and re-hook it with the switch down it says disabled, but when the you try flipping the switch up it doesn't say enabled, and the motors don't work in this case either. If you need to know the DS screen, and what it is saying to fix this problem too, just look here tomorrow, and I will have it up.
__________________
Ben Kellogg




Team Sites: [LCEC Site] [FRC/FLL Site] [LCEC Blog]
Reply With Quote